Teardown: The BMW / Harman IDC23H Infotainment Unit (B423)
Another day, another teardown - and the first blog post of 2026! Today we’ll be looking at the BMW IDC23H infotainment unit, manufactured by Harman Becker.
The IDC23H is one of the newest infotainment units from BMW, as of January 2026. The design is based on the previous-generation MGU22/MGU22H, and is used in a wide variety of BMW models - this unit in particular was found in one of BMW’s newest X1 U11 SUVs.
Dissecting the BMW NBT EVO HU Boot Process - Part 1: QNX and the IFS
For the past 2-or-so years, I’ve been hacking on my car’s infotainment unit - the BMW NBT EVO HU. I figured this would be the perfect opportunity to dive into a new topic: What does the boot process of a modern QNX-based infotainment unit look like?
Teardown: The BMW / Harman NBT EVO HU Infotainment Unit (B211)
Today’s teardown is of the BMW NBT EVO HU, an infotainment unit built by Harman Automotive - sound familiar?
The QNX_info ELF Section
When poking at binaries on a QNX-based system, you may run into an interesting ELF header: The so-called QNX_info section!
Teardown: The BMW / Harman NBT HU Infotainment Unit
Today’s teardown is of the BMW NBT HU infotainment unit, built by Harman Automotive. This head unit was used between 2012 and 2019 across a wide array of models in BMW’s lineup, in everything from their sedans to SUVs.
Edge Connector Breakout Boards
The goal was simple: For the past year or so, I’ve been poking at my car’s head unit in my free time. This has now escalated to the point where I have two or three of the head units…
They use a 1mm-pitch edge connector for debugging and development access, and I didn’t want to solder wires directly to the pins in an irreversible way. As such, I created a breakout board!
Bulk Shared Library Collecting for Ghidra
The device I’m currently working with has over five hundred shared libraries, all spread out across random folders within the filesystem. Bleh!
This is a common issue I’ve run into when working with embedded systems. You want to import an arbitrary binary into Ghidra, but first you have to spend 10 minutes tracking down where all of it’s shared libraries are located! A major pain.
But have no fear, a one-liner is here! (every Linux graybeard’s favorite saying)
Introducing elf-analyzer
In the beginning of December, I published a new tool I wrote for analyzing ELF files! This tool is aimed at helping reverse engineers and tinkerers understand embedded filesystems quickly and easily, through ergonomic methods of displaying in-depth device and binary metadata.